Filter By:
- Parts & Accessories (29)
- Combos/Systems (17)
- Headlights (44)
- Taillights (34)
- Show More Brands
- Show Fewer Brands
Lighting
$2.95
Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.
$3.99
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$5.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works.
- Compatible with all PDW rear lights except the Asteroid and Fenderbot
- Horizontal holes are 50mm apart to fit European rack standards
- Vertical holes are 18mm apart to fit most reflector mounts
$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter
$9.95
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface.
- Compatible with Ranger, Expilion, Metro, and Streak series
- Includes adapter piece only
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series
$9.99
If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
SYSTEM COMPATIBILITY
- PRO Series
Not compatible with Lumina Pro lighting systems
$9.99
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
System Compatibility
- Lumina Series
- Mako Series
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
$9.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
Not compatible with omega 300 and sentry aero 260 tail lights.
$10.49
- Versatile LED and accessories forward mount
- Bolts directly to stem faceplate
- Included Aluminum Fork Mount, spacer and screw set
- Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)
$10.95
- Installs under the seat for a low profile, less cluttered appearance
- Easy to install and stays secure in all terrain
- Clamps to most two-rail bicycle saddles
- Use with Cygolite Hypershot and Hotshot tail lights
- Can also be used with GoPro compatible interface
- Premium plastic for strong durability
- Only weighs 23 grams
- Less prone to scratching bikes compared to metal mounts
- Tail light secures to mount without removing from saddle rails
- Designed, engineered, and assembled in the USA
$12.99
Lezyne helmet mount for LED bike lights or GoPro action cameras. Follows line-of-sight for optimized night riding or recording. Constructed from durable, mold-injected Composite Matrix construction. Easy to install Velcro strap fits virtually all helmet styles. Compatible with a large number of Lezyne headlights via the GoPro LED Adapter.
- Composite matrix helmet light mount with strap system
- GoPro adapter
$12.99
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
$12.99
The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash.
Features
- Lumen Output: 25
- 4 Modes with a Run Time up to 60h
- 2 x AAA Alkaline Battery Powered
- Weight: 70g
- Battery: 2 x AAA Alkaline
- Increased safety with 210° of Visibility
- Budget Friendly Rear Lighting System
- 25 Lumen taillight with Eye Catching Flash Patterns
- Water / Dust Resistant IP64 Rated
Run Time
- Up to 60h
$13.95
Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems.
- Includes: helmet bracket, velcro strap, and foam pad.
$14.95
2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.
$14.99 - $16.00
Blackburn's minimalist Click front light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace.
- 20 lumen front light
- Versatile silicone mounting system
- Waterproof to IP-65 standard
$14.99
$19.99
25% Off
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns.
System Compatibility:
- Lumina Series
- MiNewt Mini Series
- Mako Series
$14.99
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light!
System Compatibility
- Lumina Series
- MiNewt Mini Series
- Mako Series
$14.99
Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!
$15.00
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level.
- 32mm diameter clamping area for lights
- Attaches with two M5 bolts and a steel backing plate
- Mounts on left or right side
$15.95
- Fits 25.4 to 35mm handlebars.
- Wide range compatibility designed for standard and larger diameter handlebars.
- Easy to install and stays secure in rough terrain.
- Compatible lights: Ranger Endurance, Ranger, Metro Pro, Metro Plus, Metro, Streak
- Durable and convenient.
- Premium plastic for strong durability.
- Quick release feature makes removing the light quick and easy.
- Designed, engineered, and assembled in the USA to ensure top-quality mounts for your light.
$17.95
- Compatible with 6-12V E-bike battery
- Integrated reflector
- Water and shock resistant
- Mounting distance 80 mm
- Visible from the side
- 40g
$19.00
Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship Headlight boasts 3 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing modes and has a run time of over 100 hours.
- Fits 22.0-31.8mm handlebars
- Runs on 2 x AA batteries (included)
- 100 hours run time
- Steady and flashing modes
- 91 grams/3.2 ounces
- 98 x 41 x 35mm
$19.99
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights.
System Compatibility
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems
$22.99
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included.
Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.
- Two high-output LEDs provide 11 lumens
- StVZO optimized lens with wide light spread
- E-bike compatible 6 – 12V input, 1.25W
- Composite matrix fender-mounting system
- IPX7 water resistant
- Stainless Allen key hardware included
- 130 cm power cable included
$22.99
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing.
Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.
- Two high-output LEDs provide 11 lumens
- StVZO optimized lens with wide light spread
- E-bike compatible 6 – 12V input, 1.25W
- Composite matrix fender-mounting system
- IPX7 water resistant
- Stainless Allen key hardware included
- 130 cm power cable included
$24.95
This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night.
You’ll Love –
- 5 LED bulbs for higher visibility
- 4 light modes (flashing, constant, chasing, and random)
- Compatible with any Burley trailer that has a Light Loop or Light Bracket
- Includes clip-on light and 2 AA batteries
$24.99 - $26.00
$26.00
Up to 4% Off
Compact cycling safety light with two bright LEDs and a 200-lumen Daytime Flash mode. It features a super lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (eight hour increase) and up to 200 lumens (20 lumen increase) of output. And it features an integrated USB stick for convenient cable-free recharging. The KTV Drive Front offers five output modes.
Specs
- Max Lumens: 200
- Weight: 47.5g
- Max Runtime: 20 hours
- Recharge Time: 2:15
$24.99
To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options.
Features
- Lumen Output: 100
- 4 Modes with a Run Time up to 136h
- 2 x AAA Alkaline Battery Powered
- Weight: 82g
- Battery: 2 x AAA Alkaline
- Highly Visible up to 1 Mile
- 100 Lumen Daylight Visible taillight
- Water / Dust Resistant IP64 Rated
Run Time
- Fast Flash—96:00h
- Pulse Flash—136:00h
- Steady High—72:00h
- Steady Low—127:00h
$24.99
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate.
- Side lights
- Economical, high output light
- Super bright flash setting ideal for daylight use
- Easy operation battery operated (comes with 2 x AA)
- 3 light settings – High, Low and Flash
- Lumen Output: 150
- Run Time: 18:00 – 72:00hrs
- Weight: 175g
- Battery: Alkaline AA x 2
WARRANTY
The Mako 150 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Handlebar Mount
- 2 AA Alkaline Batteries
$26.00
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike.
- Bright red LED and precision reflector
- Bolts directly to fender to prevent theft
- Weatherproof exterior for all season riding
- Weight: 62 g (2.2 oz)
- Runs on 2xAAA batteries (included)
- Lifetime PDWarranty
$26.99
The legendary Pow! blink, blink, blink
The tail light with the legendary POW! Blink, Blink, Blink has been keeping cyclists safer and more visible for more than a decade. It features long run times, brilliant optics, and the unmistakable Superflash™ pattern.
$29.00
Minimal and mighty! The USB rechargeable Asteroid headlight from Portland Design Works mounts in seconds and shines super brightly with high-quality optics so you can be seen. Ride for up to 24 hours before needing a new charge.
- 3 Modes (burn time): Flash (24 hrs), Pulse (5 hrs), Steady (4 hrs)
- UV Proof rubber mount
- Double-click lens to turn on/off
- Micro USB charge cord included
- Weatherproof exterior for all season riding
- Weight: 73 g (2.6 oz)
$29.00
Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge.
Pairs nicely with the Asteroid Headlight - also available as a light set.
- 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs)
- Weatherproof exterior for all season riding
- Micro USB recharging cord included
- Weight: 76 g (2.7 oz)
$29.00
Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want.
- 1.0 watt red LED made by Nichia
- 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time
- Large precision reflector
- Includes both Stayputnik quick release and Rack mounts
- Weatherproof exterior for all season riding
- Runs on 2xAAA batteries (included)
- Weight: 62 g (2.2 oz)
- Lifetime PDWarranty
$29.50
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame.
- 6061 Aluminum
- 30g
- 26.0mm outside diameter
- 5mm mounting bolt
$29.95
- High power 35 lux LED light, more than 50,000 hours life span
- Integrated retro reflector to be better seen by oncoming traffic
- Compatible with 6-12V E-bike battery
- Optimal light distribution by our double lens technology
- Clear lens technology, you are also visible from the side
- Compact, sportive design
- 70 gr
$29.95
Packed with more power and technology than meets the eye, the new Dice™ TL 50 tail light is engineered to stand out day and night, delivering powerful and extra-wide 50 lumen flashes. Engineered for road cyclists and commuters, its extra-wide beam maximizes your presence from afar while its low-profile flexible mount keeps secure on the seat post, including aero shapes. It even senses day and night, automatically switching to the optimal flash tempo. (Patent Pending)
- Powerful 50 lumen flashes with 8 light modes
- Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes: Day Modes: High - Group - SteadyPulse® Day - Single Flash Day - Triple Flash Day, Night Modes: High - Group - SteadyPulse® Night - Single Flash Night - Triple Flash Night
- Flashing modes emit powerful lightning-like flashes to highlight your presence in broad daylight
- SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night
- Enhanced Cycling Optics™ (ECO) expands your presence from afar with an extra-wide and long-range beam
- USB rechargeable Li-ion battery
- Low battery indicator
- Light mode memory saves the mode you're in before the light is turned off
- Low profile, water-resistant design only weighs 30 grams
- Flexible mount conveniently attaches to most seat posts including aero styles
RUN TIMES
- High: 1:30 hrs
- Group: 65 hrs
- Single Flash Night: 11 hrs
- Single Flash Day: 20 hrs
- Triple Flash Night: 35 hr
- Triple Flash Day: 55 hrs
- SteadyPulse® Night: 6:30 hrs
- SteadyPulse® Day: 8 hrs
- CHARGE TIME: 2 hrs
- MOUNTING: Seat Post
- BATTERY: Built-in Li-ion
- SYSTEM WEIGHT: 30g
Patent pending.
*Features and specs are subject to change without notice.
$29.95
Overview
Big things come in small packages, and that is no different with the new Blinder Mini Square rear light.
Using new COB technology, the Blinder Mini Square produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions.
The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair.
The Blinder Mini Square rear light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode.
- Dimensions: H: 40mm x W: 33mm x L:31mm
- Weight: 17 grams
- Lumens: 30
UNRIVALLED LED TECHNOLOGY
Blinder Mini's surface mounted LEDs output 30 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash.
SIMPLE & SMART FASTENING SYSTEM
Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame.
INTEGRATED USB RECHARGEABLE
You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
$29.99
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate.
- Side lights
- Economical, high output light
- Super bright flash setting ideal for daylight use
- Easy operation battery operated (comes with 2 x AA)
- 3 light settings – High, Low and Flash
- Lumen Output: 200
- Run Time: 15:00 – 60:00hrs
- Weight: 175g
- Battery: Alkaline AA x 2
WARRANTY
The Mako 200 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Handlebar Mount
- 2 AA Alkaline Batteries
$29.99
AC adapter for NiteRider Pro 2200 Race, Pro 1800 Race, Pro 1200 Race, MiNewt Pro 770 Enduro, MiNewt Pro 750, TriNewt, TriNewt Wireless and all MiNewt Series bike lighting systems.
Please note: Style and color may vary
SYSTEM COMPATIBILITY
- Pro 2200 Race
- Pro 1800 Race
- Pro 1400 Race
- Pro 1200 Race
- MiNewt Pro 770 Enduro
- MiNewt Pro 750
- TriNewt
- TriNewt Wireless
- MiNewt Series
$29.99
The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts.
Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge.
- Highly durable design made with fiberglass reinforced plastic
- Smooth 300 lumen beam pattern in an ultra compact and lightweight design
- Innovative Collimator Lens – optimizes your field of view
- Built-in, easy on and off handlebar strap mount
- 4 Light Levels plus 1 Daylight Flash Mode
- Fuel Gauge / Battery Level Indicator
- FL1 Standard IP64, dust and water-resistant
- Convenient USB rechargeable
WARRANTY
- The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Internal Li-Ion Battery
- Build-in, Handlebar Mount
- USB Charging Cable
$29.99
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm.
System Compatibility:
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems
$29.99
The PDW USB-rechargeable Io taillight has two super-bright LEDs for a great value, and offers a super-quick charge time of only 2.5 hours. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding.
- 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h)
- Seatstay mount included
- UV-proof rubber strap bracket for easy on and off included
- Includes Micro USB-recharging cord
$29.99
The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems.
- Seatpost or seatstay mounting
- 220 degrees of visibility
- 25 Lumens
- 48" cable length
- Remove Bosch plug to work with any 6V-15V e-bike system
$30.00
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too.
- ?Two 0.5 watt red LEDs by Nichia Brand
- Three modes: zZz, a-HA!, and Rock Steady
- Up to 50 hours run time on 2xAAA batteries (included)
- Includes Stayputnik seatpost mount
- Weatherproof exterior for all season riding
- Weight: 57g (2oz)
$32.99
Front
Compact, super-lightweight USB rechargeable LED cycling safety light. Its durable co-molded construction is minimal and has an IPX7 water-resistance rating. A versatile mounting strap quickly mounts to a variety of bar sizes. Five output modes offer up to 15-lumens and the custom Wide Angle Optics lens provides 270° of visibility. The Femto USB Front can run for up to 20 hours and is easily rechargeable with the included Micro USB cable. A secure, threaded composite matrix cover keeps the USB port clean and sealed. The Femto USB is perfect for commuters and recreational riders looking for a simple and inexpensive way to add visibility.
Rear
Compact, super-lightweight USB rechargeable LED cycling taillight. Its durable co-molded construction is minimal and has an IPX7 water-resistance rating. A versatile mounting strap quickly mounts to a variety of post sizes. Five output modes offer up to 5-lumens and the custom Wide Angle Optics lens provides up to 270° of visibility. The Femto USB Rear can run for up to 15 hours and is easily rechargeable with the included Micro USB cable. A secure, threaded composite matrix cover keeps the USB port clean and sealed. The Femto USB is perfect for commuters and recreational riders looking for a simple and inexpensive way to add visibility.
Specs
- Max Lumens: 15 (front) / 5 (rear)
- Weight: 22g (front) / 23g (rear)
- Max Runtime: 22 hours (front) / 15 hours (rear)
- Recharge Time: 2:30 hours (front) / 2:30 hours (rear)
$34.95
The Dice Duo is the smallest USB rechargeable light capable of changing from a white headlight to a red tail light at the press of a button. Designed for the road, this cubic inch light can turn from an impressive 110 lumen headlight to see, to an attention-grabbing 30 lumen tail light to be seen. Its adaptable flex mount can easily strap to handlebars or seat posts in a snap, even aero styles. For premium safety, its Adaptive Flash technology senses day or night, automatically switching to the optimal flash mode to maximize your visibility. Made for road cyclists and commuters, the Dice Duo is a powerful headlight and a tail light rolled into one.
Performance
- Functions as 110 lumen bicycle headlight or 30 lumen tail light
Technology & Safety
- 2 in 1 technology allows you to switch from headlight to tail light just by holding the power button for 3 seconds.
- 8 headlight and 8 tail light lighting modes engineered for use on roads and commuting
- Headlight mode: Boost, High, Medium, Low, SteadyPulse® Low, SteadyPulse® High, DayLightning® Triple Flash, DayLightning® Single Flash
- Taillight mode: High, Group, Single Flash-Day, Triple Flash-Day, SteadyPulse® -Day, Single Flash-Night, Triple Flash-Night, SteadyPulse® -Night
- SteadyPulse® mode alerts motorists with attention-grabbing pulses while its overlapping steady beam constantly lights your way at night
- DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours
- Cycling Tuned Optics expands your field of vision with an extra-wide and long-range beam compared to typical lighting optics
- IP64 water-resistant design for use in all weather conditions
- USB rechargeable internal battery lasts up to 90 hours
- Light mode memory saves the mode you're in before the light is turned off
- Low battery indicator alerts you when a charge is needed
RUN TIMES:
Headlight mode: 1 hrs to 40 hours
Taillight mode: 1:45 hrs to 90 hours
CHARGE TIME:
- 2 hrs
MOUNTING:
- Flexible mount easily adjusts to fit on handlebars and seat posts including aero styles
BATTERY:
- Built-in Li-Ion
SYSTEM WEIGHT:
- 30g
*Features and specs are subject to change without notice.
$34.99
Packed with more power and technology than meets the eye, the new Dice™ HL 150 fires up the night with an incredible 150 lumens, and stands out in broad daylight with its intense lightning-like flashes. It even senses day and night, automatically switching to the optimal flash mode. Engineered for road cyclists, it uses a low-profile, flexible mount that's designed for most handlebars including aero bars. (Patent Pending)
- Powerful 150 lumen output with 8 light modes
- Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes
(Boost - High - Medium - Low - SteadyPulse® Low - SteadyPulse® High - DayLightning® Triple Flash - DayLightning® Single Flash)
- DayLightning® mode emits powerful lightning-like flashes to highlight your presence in broad daylight
- SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your path
- Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam
- USB rechargeable Li-ion battery
- Low battery indicator
- Light mode memory saves the mode you're in before the light is turned off
- Low profile, water-resistant design only weighs 30 grams
- Flexible mount conveniently attaches to most handlebars including aero bars
Patent pending.
*Features and specs are subject to change without notice.
$34.99
The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. Our favorite feature is the side "gills" that emits light, it not only looks cool but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate.
The TL 6.0 has five ultra-bright LEDs with four different operating modes, including three different flash modes. The amber Side Lights help to provide even more visibility from the sides of the rider. The TL 6.0 will help keep you safe and seen from behind (180-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash.
Mako 200
- Side lights
- Economical, high output light
- Super bright flash setting ideal for daylight use
- Easy operation battery operated (comes with 2 x AA)
- Run Times: 15:00 – 60:00 hours
- 3 light settings—High, Low, and Flash
- Water / Dust Resistant IP64 Rated
TL 6.0
- 5 Ultra Bright LEDs
- Up to 60 hours run time
- Cost-effective, high-quality light
- Super bright day time flash mode
- 3 operating modes
- Runs on AAA batteries
- Water / Dust Resistant IP64 Rated
$34.99
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate.
- Low cost, high powered light
- Highly visible in traffic = keeps you safe
- 3 light settings – High, Low and flash
- Tough durable design
- Lumen Output: 250
- Run Time: 12:30 – 28:00hrs
- Weight: 175g
- Battery: Alkaline AA x 2
WARRANTY
The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Handlebar Mount
- 2 AA Alkaline Batteries
$34.99
The Portland Design Works Daybot Tail Light has a CREE LED to power a 100 lumen Daytime Pulse mode for increased visibility on sunny days. Switch from Day Modes to Night Modes to conserve battery power. Hold the power button down for 1 second to turn the light on or off.
The Daybot Tail Light has redesigned mount that works with the included seatpost and seatstay brackets.
- 2 Day Modes (runtime): Solid - 60 lumens (6 hours), Pulse - 100 lumens (20 hours)
- 3 Night Modes (runtime): Solid - 20 lumens (20 hours), Flash - 20 lumens (100 hours), Pulse - 20 lumens (30 hours)
- USB rechargeable li-polymer battery
- Weatherproof exterior for all season riding
- Includes brackets for seatpost and seatstay mounting
- Mounts vertically or horizontally
- Includes Micro USB recharging cord
- Weight: 1.9 oz
- Lifetime Warranty
$34.99
We’ve taken the Pow! Blink, Blink, Blink of the original Superflash tail light and made it rechargeable. Its rechargeable lithium polymer battery, long run times, and brilliance day or night make this a great choice for your commute and long twilight training rides. It’s a thing of bicycling beauty.
$37.99
The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute.
- 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours)
- Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard
- Vertical Cutoff Beam to focus 200 lumens on the road ahead
- CREE LED
- Battery Meter for Li-ion battery
- Micro USB charging cord included; 3 hour charging cycle
- Weatherproof exterior for all season riding
- One second delayed power switch to prevent accidental on/off
- Light wakes up in last mode used
- Includes UV-proof quick on/off handlebar mount
- Weight: 57 g (2 oz)
Page 1 of 3
Next page