Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$11.99
The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

$19.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm
- Designed to maximize bottle capacity on small frame bikes and dual suspension frames

$9.95
The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

$29.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.
- Mounts to bottle bosses, or to the B-Rad base for additional carrying options
- Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
- Cradle strap is 40mm wide and 350mm long for supporting loads

$39.95
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it.
- Mounts to the B-RAD system or on its own
- Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

$22.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Three slots for additional adjustments over the B-RAD 2 base
- Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

$30.00
Compact on-bike storage for tools and flat repair.
Now updated with an oversized 30mm strap that reduces shifting during rides, the Hot Laps Gripper Bag's minimalist design stows easily almost anywhere on your bike. It's ideal for carrying essentials on a quick ride or in tandem with our larger packs on longer rides, moving weight off your back and freeing up valuable space for water and food. Keep the Gripper on your bike, and your chances of walking out of the woods are forever minimized.
- On-bike storage solution
- Fits spare tube, tire levers, CO2, etc. (sold separately)
- Attaches under seat or at multiple locations on bike frame

$12.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost.
CONSTRUCTION
• Aluminum

$6.00
Replacement hardware, bolts and nuts for Wald baskets.
Works with Wald Basket models: 520, 520GB, 535 and 535GB

$16.95
The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products:
- Raw
- MTB Hydro
- Airborne
- Ranger
- Patriot
- Vertical
- Outlander (NOT Compatible with Outlander PRO)
With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:

$60.00
The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter.
- Compatible with 35.0mm bars or 31.8mm bars (with included shims)
- Compatible with all Salsa EXP Series Anything Cradles
- Hinged clamps allow for easy installation and removal from handlebars
- Made of 6061 forged aluminum

$19.99
- Expands up to 2x size to securely grip any shape
- Weatherproof material will not deteriorate
- Molded non-scratch hooks

$5.00
Replacement buttons and straps for the Remora Aero Storage.
- Rubber straps and buttons to secure the Remora Top Tube Storage container.

$15.00
- Strap with buckle and hook for supporting the Seat-Packs
- Prevents lowering of pack with uneven weight distribution
- Additional support for Seat-Pack straps when fully loaded
- Excessive strap is fixed with Velcro
- Can be used for Seat-Pack M and L

$24.95
While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost.
- Allows the usage of seat packs on a dropper post
- Protects the dropper stanchion from wear and grit
- Can act as a travel limiter when full drop isn't needed
- Sized by stanchion diameter

$11.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost.
CONSTRUCTION
• Aluminum

$104.99
$140.00
25% Off
Flexible holder for bikepacking gear that attaches to saddle and seatpost for maximum stability. The construction has aluminum frames where the lower section can move freely to accommodate larger items. Two sets of compression straps will secure your drybag or tent, and attaching and detaching gear is easy thanks to the quick-release camlock buckles. Comes with an extra compression strap for larger loads and is perfect with the Specialized/Fjällräven Seatbag Drybags, 10 or 16 liters. Its compact size (45 x 11 x 20cm) makes it compatible with most frames and wheel clearances. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures.
- Durable design with Vinylon panels and aluminum stabilizer frames.
- Lower frame extends downwards to create more packing space.
- Adaptable fixtures that fit most saddle rails and seatposts.
- Double camlock compression straps ensure gear stays in place.
- Reflective details increase visibility in low-light conditions.
- Material- Vinylon F (100% vinylal)

$15.99
$22.00
27% Off
Don't be fooled by its minimalistic design—the SupaStrap locks your gear down tight. The ultra secure design conquers cobblestones, savage trails, and everything in between.
- SupaDuty Velcro main strap
- TiteLock integrated Velcro lock
- Bulletproof YKK buckle

$17.99
$25.00
28% Off
The MIK Adapter Plate is an ideal accessory if you want to carry your essential items around quickly and easily. It will unlock your ability to customize your storage options on your rack. It’s compatible with removable bicycle accessories and suitable for luggage carrier racks for the MIK system or MIK carrier plate. The MIK Adapter Plate is a must-have for your Vado, Como, or Tero.
- Attaches to a wide variety of accessories, including the Turbo Basket and various Basil accessories.
- Connects securely to MIK and MIK HD racks or the MIK carrier plate (not included).
- 15kg max. load when used on the MIK HD rack.
- Allows for fast and tool-less installation and removal.
- Includes MIK stick key for increased security.

$9.99
Replacement waterproof liners for Banjo Brothers bags.
To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide.
- Works only with models 01150, 01150R and 01150W
- Welded seams
- Not suitable as a stand-alone bag

$18.99
The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike.
- UV- and weather-resistant
- Includes band to keep excess strap out of the way
- 22" length is best for use with Salsa Anything Cage and Anything Cage HD
- 30" length is best for use with Salsa Anything Cradle
- Sold in pairs

$15.00
The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

$14.99
- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only)
- Compatible with luggage carriers from 80 up to 150 mm
- -01: carrier plate for rear racks that are not MIK ready.
- -02: adapter plate for bicycle rear bags that are not MIK ready
- Suitable for e-bikes
- Max load: 26lbs/12kg

$6.00
Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack.
- 2 inserts measuring 8 mm
- 2 inserts measuring 11 mm

$26.99
The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle.
- On-bike storage solution
- Inner sleeve to compress the tube
- Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc.
- Wide strap and durable metal buckle
- Silicone and rubber grip for stability
- Compact and lightweight
- Attach under the seat or other locations on the bike frame
- Weight 4oz

$9.99
The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations.
- Can be installed and removed by hand or with allen key
- Includes necessary 0.5 mm washers and 4 mm spacers
- Sold in packages of two

$15.00
Stash your ride snacks, repair kit, or other ride essentials in this secure and stylish KEG.
- Fits in standard bottle cages
- Keeps contents secure and dry
- Matches Salsa Dawn Patrol socks, bottle, and hat
Page 1 of 2
Next page