Filter By:
Bells/Noise Makers
$46.49
- 115 decibel horn with volume control switch
- Mounts to most handlebars
- Air reservoir is easily refilled with any bike pump - no batteries needed
- Extension allows for more versatility when mounting
$13.50
Don't let the half-pint stature fool you, Mirrycle's little Incredibell Brass Solo packs the beautifully resonant ring of solid brass. Its compact size and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and it rings clear for all to hear.
- Dome Diameter: 33mm (1.3")
- Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$21.00
Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.
$19.99 - $22.00
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality.
The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell.
THE LOOK
Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable.
THE SOUND
Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord.
THE MOUNT
What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all).
What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
$13.50
Mirrycle's Incredibell Brass Duet Colors makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Its compact size lets you mount it just about anywhere on your handlebars. And, the bell's vibrant colors add a splash of personality to any bike.
- Dome Diameter: 33mm (1.3")
- Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$25.00
Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear.
- Solid brass bell
- Brass striker
- Alloy mounting
- Fits 22.2 - 25.4mm handlebars
$19.00
Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort.
- Dome Diameter: 45mm (1.7")
- Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters
$11.00
The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger.
- Dome Diameter: 43mm (1.7')
- Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters
$29.99 - $34.99
$29.99 - $39.99
Up to 13% Off
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available.
- Mounts with steel strap and features lever strike operation
- Fits bars 22.2mm to 31.8mm
- Made in Japan
$15.00
Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring.
- Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters
- Dome Diameter: 44mm (1.6")
$12.00 - $15.00
Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear.
- Dome Diameter: 33mm (1.3")
- Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters
$13.00
Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring.
- Fits handlebars with 22.2mm (.87-inch) outside diameters.
- Dome Diameter: 44mm (1.6")
$12.50
The Incredibell Clever Lever has a very pleasant double ding sound. The unique lever can be pivoted to any position so it can be easily reached by the thumb or another finger.
- Dome Diameter: 38mm (1.5")
- Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters
$7.99
Clear and Classic Ring
Cut through traffic noise and make yourself known on the road while protecting yourself from the risk of auto and pedestrian accidents.
Features
- Classic ring
- Low profile with clean minimalist design
- Thumb spring trigger
- Quick Assembly: Easy screwdriver assembly installation on 22.2 mm bar
- Alloy dome with molded thermoplastic mounting
- Weight: 0.04 lb / 18g
$29.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available.
- Mounts with steel strap and features lever strike operation
- CD3171 and 3172 have matching domes and strikers
- Fits bars 22.2mm to 31.8mm
- Made in Japan
$22.49 - $23.99
$23.99
Up to 6% Off
- Designed with road drop bars in mind
- Can mount on the brake hood, On cable housing, And on some flat bar levers (Levers need to have flat section less than 9mm deep)
- Clamps on with a screw. Simply turn the bell dome to loosen and tighten
- Reversible for right and left hand use
- Does not use a spring loaded clip
- Made in japan
$13.00 - $17.00
A new angle on bells. Low and lean looking; very techy too.
- Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters
$34.99 - $39.99
$39.99
Up to 13% Off
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available
- Mounts with steel strap and features lever strike operation
- Fits bars 22.2mm to 31.8mm
- Made in Japan
$12.00
Little, Light, & Loud! Our Original Incredibell has been redesigned for quick and easy mounting on nearly any handlebar. The pivoting dinger can be rotated to any position.
$12.50
Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes.
- Dome Diameter: 51mm (2")
- Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$8.75
Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!
$12.00 - $13.00
$13.00 - $14.00
Up to 14% Off
The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too!
- Dome Diameter: 48mm (1.9")
- Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters
$39.95 - $39.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars.
- Fits 23.8 – 31.8mm handlebars
- Weight: 46.5g
$13.50
Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars.
- Dome Diameter: 33mm (1.3")
- Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$17.00
A steampunk statement for your handlebars. A transparent dome lets colorful gear workings of the insides of the bell be seen. The Gear Bell is even rainproof.
$10.00
Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear.
- Weight: 26g (.9oz)
- Dome Diameter: 34mm (1.34")
- Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters
$16.99
The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell.
Dome Diameter: 34mm (1.34")
Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters
$12.99
Low profile and brilliant bass dome.
Cut through traffic noise and make yourself known on the road while protecting yourself from the risk of auto and pedestrian accidents.
Features
- Classic brass sound
- Low-profile design with brilliant brass dome
- Adjustable rotating thumb spring trigger for ambidextrous use
- Quick Assembly: Tool-free - easily mounts to any bar from 22.2 - 36.2 mm
- Brass dome with adjustable rubber strap
- Weight: 0.08 lb / 34g
$12.00
Don't let the tiny size fool you. Mirrycle's Incredibell Bellini is little, light and gets noticed! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear.
- Weight: Black & Silver 17g, Brass 28g
- Dome Diameter: 28mm (1.1")
- Fits handlebars with 21mm – 22.6mm (.83" – .89") outside diameters
$28.00
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate.
- Polished brass bell
- Replaces a 10mm 1 1/8" headset spacer
- Quick-reflex alloy clapper
- Lifetime PDWarranty
Page 1 of 1