Tools

Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge, the alignment can be checked quickly and accurately at the drop-out. It includes a retractable pointer to fit all sizes and types of bicycles.

Made for the rigors of everyday shop use, this adjustable tap handle fits many common bicycle taps. • Fits most metric taps from M4-M12 • Fits most standard taps from #8-9/16”

A great shop accessory made to hold a wide variety of axles, spindles and any Park Tool Freewheel Remover/Lockring Tool. Made from precision extruded aluminum.

The Park Tool 758.2 will ream and face the head tubes of bike using the 1.5" standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750.2 Centering Cone Adaptor.

The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 36-notch tool fittings, including Praxis Works M35 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 36-notch bottom bracket tool fittings with a major diameter of 51–53 mm and a minor diameter of 50.7 mm, including: - Box® Two Oversized M35 - Praxis Works® M35

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

High-quality L-key set with extra-short arm for use on difficult-to-access screws. For hexagon socket screws. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. Comes in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Extra-short arm for use on difficult-to-access screws - Hex-Plus allows socket head screws to live longer - The ballpoint on the long arm allows dependable working even in difficult situations - Chrome-plated for high corrosion protection - In a practical clip out of wear-free material

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

7-piece tapping drill bit set in a stable plastic box for the cutting of metric threads. The hexagonal bit shaft ensures very good power transfer. The finely-tuned material elasticity makes for great durability. Perfect chip removal and a low tilt risk. The Rapidaptor ensures rapid bit change without any extra tools. - Ideal for mobile repair and assembly work - Rapidaptor holder for rapid bit change - 1/4" drive suitable for power screwdrivers - Rapidaptor universal holder, non-magnetic, and tapping drill bits with 1/4" drive - In practical and robust plastic box

- Zyklop socket with 3/8 inch drive and holding function - "Take it easy" Tool Finder with color coding according to size

- 11 speed compatible - Allows removal, installation and peening of rivets

- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups - Allows use of a Torque wrench to obtain proper torque specifications

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!

Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand (each sold separately). Park Tool's Rotor Truing Gauge features an infinitely adjustable, finely threaded indicator gauge. It works with any diameter brake rotor.

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.

Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch Gen 2 e-bike motors after the crank arm is removed. - Fits Bosch Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models - For lockrings with 50mm outside diameter and 8 notches - Replacement for Bosch 0275009003 tool - Torque wrench compatible 3/8-inch square drive - Constructed of 4140 heat treated steel and plated for long life

Park Tool's Shop Scissors are shop quality with sturdy, stainless steel blades and a dual-density grip. They're perfect for a wide range of mechanic's duties including cutting zip-ties, boxes, bar tape, and handle grips.

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions

They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.

Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel

8-Bit System is a multi-function tool that regroups all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

- Takes place of rear wheel providing tension on chain to protect the frame when rear wheel is removed for cleaning, storage, or transport. - Allows full forward or backward rotation of drivetrain and shifting through full range of gears. - Quick and easy one-handed installation on standard QR style dropouts and removable pulley wheel works directly on 12mm thru axles. - Professional grade stainless-steel, aluminum, and solvent resistant plastic components ready for daily life in the wash bucket. The original Pedro's Chain Keeper has been a favorite in the wash buckets of mechanics for decades. The new Pro Chain Keeper carries this heritage forward to new levels featuring one-handed installation, shifting across all gears, professional duty stainless-steel and aluminum construction, a heavy-duty solvent resistant plastic pulley, and 12mm thru axle compatibility.