Brakes/Levers/Pads

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management - Hub Compatibility: Center Lock - Disc Material: Steel

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts

- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment - Qwik-Adjust Barrel Adjuster - Bend Zone - All weights per pair - All levers are compatible with mechanical disc brakes and linear-pull brakes

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear pull or mechanical disc brakes. They are super easy to install and adjust-so you can dial in the modulation just the way you like. - All levers are compatible with mechanical disc brakes and linear-pull brakes. - Reversible - Reach Adjust and Speed Dial Leverage Adjust

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

The BB5 offers our Tri-Align Caliper Positioning System, tool-free pad replacement, a melt-forged body and an inboard pad adjustment knob. One try and you'll wonder if the BB5's are really entry-level brakes. - Mechanical simplicity

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually

Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g

Serfas' DBPS2 MTB Shimano Compatible Disc Pads offer long-lasting, reliable braking. They're semi-metallic for durability and are compatible with Shimano XT 4 Piston BR-M775 Brakes.

6-Bolt disc brake rotor - Easy to install anti-loosen plates help secure disc brake rotor bolts in place - Resin/Metal pad compatible - Size: 160, 180, 203, 220mm

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

Lock rings for all TRP Centerlock Rotors

Every high-quality Galfer-patented Wave® rotor is made from a proprietary mix of virgin high carbon 420 stainless steel laser cut (never stamped) double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Precision made in the Galfer factory in Spain. - Rotors are designed to provide a greater resistance for reliable braking - 2.0mm thickness and Joint Geometry offers greater rigidity and thermal stability - *Please confirm that your disc brake caliper is compatible with 2.0mm thick rotors

Hope RX4-SR disc brake pads are available in a range of compounds to optimize riders specific performance needs. All pads are designed and dyno-tested in-house at Barnoldswick. - Designed to work with SRAM dropbar brake systems (DOT Fluid) - Softer than sintered, organic pads are low-noise and perform best in dry conditions, but wear faster

SRAM Guide/G2 Compatible Disc Brake Pads

Trying to get a little extra traction on shifters and brake levers has inspired home-brew mechanics to experiment with skateboard deck tape, hot glue, or slide on brake lever grips. Katie Compton actually went so far as to combine sand and superglue to ensure maximum grip in any conditions. While those solutions are pretty kick-ass, we try to make it a little easier with our Lever Grippies. Just stick ‘em on for more sticktion.

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

Galfer USA brake pads for use with Formula 4-Piston disc brake calipers. - The Galfer USA Pro Compound is an aggressive bicycle brake pad often utilized for race use - Provides an immense amount of braking power - Withstands mud and dirt, and has a high resistance to fade - Fits: Formula Cura 4

Galfer USA brake pads for use with Hope M4 disc brake calipers. - The Galfer USA Pro Compound is an aggressive bicycle brake pad often utilized for race use - Provides an immense amount of braking power - Withstands mud and dirt, and has a high resistance to fade - Fits: Hope M4 and Trickstuff Diretissima

The Campagnolo Chorus Ergopower Brake/Shift system features improved ergonomics that can be tailored to the rider's individual preferences. - Ultra-Shift function allows for multiple shifts in one motion and greater control for racing - Aluminum braking lever features reach adjustment mechanism - Technopolymer Ergopower body Specifications: - Rotor Included: No - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes

The Campagnolo Super Record EPS Ergopower shift lever features effective ergonomics and the best of Campagnolo's shifting and braking technology. - Campagnolo's Multishifting technology allows you to change several sprockets on the 12-speed cassette with a single shift - When the chain engages immediately, the derailleurs can be actioned with minimum effort and in any position on the handlebars, allowing for quick shifting - The controls offer a stable and safe grip when standing pedaling or when leaning high on the handlebars - Shaped cushioning and an adjustable reach make these controls perfect for any cyclist, regardless of hand or finger size - The flat-mount Campagnolo brake caliper ensures powerful, modular braking in any situation owing to pistons measuring 22mm in diameter - Brake pad return guaranteed by the magnetic system ensures that there is no friction at the time of brake lever release - A special metal plate positioned between the pad and the caliper piston, cushions the vibrations during braking Specifications: - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Front Der/Shifter Compatibility: Campy Record/Super Record EPS - Rear Der/Shifter Compatibility: Campy Record/Super Record EPS - Drivetrain Speeds: 12 - Adjustable Reach: Yes

- Super Record disc brake shifter/brake lever and caliper - Pre-assembled, with pre-bled hydraulic housing - Adjustable lever reach - AMS system allows adjustments of the modulation and lever travel - Vibration-canceling brake pads for quiet performance - Magnetic return spring - Ultra-Shift mechanism allows multi-shifts in both directions (4 up, 5 down) - Weight: 697g per pair (levers, hoses, calipers and fluid)

- Lightweight aluminum spider design improves stability and durability - Durable stainless steel resists corrosion - Compatible with all disc brake pad compounds

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds