Other

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

RaceFace X-Type Bottom Bracket Outer Race Seal - Replacement for cracked or broken X-Type outer race seals - Sold each

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Standard replacement star nuts for threadless steerers.

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- Chrome allen seat binder bolt

A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

Single sided, bottom bracket mounted cable guide, with integrated cable housing stop. - Intended to fit 40mm diameter bottom bracket shells - Includes M5 mounting bolt - Direct replacement for: Salsa Vaya, Salsa Warbird (Alloy), Salsa Journeyman, All-City Cosmic Stallion, - All-City Gorilla Monsoon, All-City Macho King, All-City Space Horse Disc

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

Frame Plugs for Internal Cable Routing

Single Frame Plug for Dropper Routing

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

Alternator 1.0 Set Screws

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 10mm spacer

The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.

- Durable custom-molded plastic guard - Co-molded rubber exterior to help quiet chain-slap noise - Easy installation and removal

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

Replacement hardware kit for Salsa Alternator Flat Mount dropouts. - For use only on frames designed for the Alternator Flat Mount standard

Chainstay protectors to guard your Salsa frame from scratches and damage.

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 15mm spacer

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Kit includes one (1) 1-1/8" x 20mm spacer

- Super light carbon spacers for tuning stem height - Spacers are internally weight relieved to drop a few extra grams

Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb

Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter

- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

Dimension Seatpost Binder Bolts - 16g

Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

Problem Solvers Bubs Frame Plugs to fill M5 bolt holes in your frame and fork. Replace water bottle and rack mount bolts for a clean look while keeping grit and moisture out of the inside of your frame. Protect your frame bag fabric from abrasion, or just take a little weight off your bike. - Fits most frame and fork M5 bolt holes - Shaves weight, saves threads, looks sleek - 10mm length - Rubber construction - Bag of 10

The Problem Solvers SpaceOuts Set includes 2 5mm hex bolts and spacers that let you add space between your bottle cage and frame. This comes in handy on frames with clamp-on front derailleurs and tight clearance for cage mounting.

The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.

- DT Swiss cartridge bearings - Sold in pairs

Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.

Housing liner provides an extra line of protection between cables and housing. - Slick-Lube housing liner reduces friction to improve braking feel - Compatible with Nokon brand cable housing systems

- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks

The Problem Solvers Cable Pulley is the correct replacement for their Cross Clamp pulley (Cross Clamp sold separately) and it will also work on most frames that have a mount for a pulley. You get the aluminum pulley and the brass bushing.

Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve

RockShox Reverb Hose Parts

- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10

This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.