Other

Fit Kit SET813 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru axle. This kit includes: - 12 x 154—172mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET811 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 168—180mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces and guarantee proper headset preload. And they look great too. Kits include a 3mm, 2x6mm, and 2x12mm, spacers.

This pair of 6" long extenders attaches the Old Man Mountain rack frame to the front fork. The extenders have a slot for adjustability, which allows you to level the rack on different types of bikes. Includes hardware. - 6" length - Includes slots for adjustability - Made from 6061 aluminum and powder coated matte black for finish and durability - Can be mounted to eyelets or to the Old Man Mountain pucks if your bike does not have eyelets - May need to be bent to fit width of frame - Includes hardware

Fit Kit SET701 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle. This kit includes: - 15 x 148 mm thru axle with M15 x 1.5 mm thread pitch to fit Rock Shox forks (may fit others as well) - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.

These handy Problem Solvers Eccentric Bottom Bracket Shims allow you to fit your existing Eccentric Bottom Bracket into BB shells with inner diameters of 55mm or 57mm. - Anodized black - 6061 Aluminum

Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in the Minneapolis, MN USA - Fits 1 1/8"" steerers only - Made from 6061-T6 Aluminum

RockShox 32mm Seal Kit

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Fit Kit SETQRR contains all the parts to mount the rack to the rear of a road or mountain bike with a 10 x 135mm quick release hub. This kit includes: - 10 x 135mm QR Skewer - A pair of pucks - Clear protective tape - all mounting hardware - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles.

Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

RockShox Volume Reducer Kits

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

RockShox Volume Reducer Kits

Eyelet Bushings for repair and maintenance of Rockshox rear shocks.

Replacement piston and seals for Hope disc brake calipers.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

- DT Swiss cartridge bearings - Sold in pairs

The Campagnolo Adjustable U-Shape Spring Support Caliper Brake Part

Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 47mm lower headset bearings - Compatible with 33mm (1-1/4") tapered steerer tubes - Lightweight aluminum construction

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length. - Designed for M8 x .75 thread pitch - 10mm long - 4mm hex head - Bolt length is laser engraved onto the bolt head for easy length identification - 6-7 Nm installation torque with light grease on threads only

These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. - 6mm length - Made in the US out of 7075-T6 Aluminum - Has hex heads on both the bolt and nut for easy installation - Max torque of 7-8 Nm with light grease on threads only

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Replacement compression knobs for RockShox suspension forks.

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk Elastomer 1 - 40 Durometer, X-Soft

The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks

RockShox XLoc Parts

Dimension Seatpost Binder Bolts - 16g

Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized - Length: 10m

Featuring a universal design that allows the switch from a bolt to QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it. - CNC-machined aluminum lever and clamp - Brass cam allows increased durability clamping force - Laser-etched logos

RockShox Volume Reducer Kits

RockShox XLoc Parts

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

Adapters to convert your flat mount fork to post mount calipers - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor - Each includes two bolts

Integrated Mountain bike shifter adapters for TRP brakes are now available for Shimano I-Spec B, I-Spec II, and SRAM MatchMaker. Adapters will mount your shifter or dropper lever directly to your TRP brakes to keep your cockpit nice and tidy.

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert -Soft

Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts

Chainstay protectors to guard your Salsa frame from scratches and damage.

- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

Lip-Locks secure your seatpost and add functional bling to your ride. - Non-quick release version of the Flip-Lock - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads

Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Allows the rear axle to be adjusted through a 15mm range - Thru-axle diameter = 12mm; thread pitch = 1.5 - Note: This part number only includes a single Alternator Flat Mount plate - Uses Salsa 465 replaceable derailleur hanger (FS2322), sold separately. Also requires Salsa Axle Stud kit (FS1181) - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing