Wheels

In the early design phases of our Traverse Fattie 29, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a proper, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.

This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

- Axle adapters for CX/GX/MT/FB-1110 Elite Series front hubs - Available in standard QR, 12mm, 15mm, and 20mm thru-axle options - Material: Aly - Color: Blk

- Shell: 8mm flanged axle nut - Flanged

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.5mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Road 400 CX Front - HB-RM40 Front - Shimano HB-RM40 Front - HB-RA50 Front

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Compatible with 9.5mm x 26tpi axle - Cone Wrench Size: 13mm - Threads: 9.5mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Taiwanese hubs with 9.5mm x 26tpi axle

What feels better than passing a mountain biker on the trail while gripping the hoods of your cross bike? Not much, but the CR 1600 SPLINE offers more than that. Whether you are cutting through mud, dancing on icy, frozen trails, or exploring dusty desert roads, you will feel the great efficiency of these wheels. Wide straight-pull spokes attached to a beautifully machined, high end Ratchet System hub will keep encouraging you to attack new challenges as soon as the last one is over, and the CR 1600 SPLINE is totally up to it.

CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Not all carbon rims are created equal. If your carbon rim is too stiff, you're losing speed and risking tire pinch flats. The Stan’s Crest CB7 rim with RiACT absorbs radial vibrations and damps impacts. It's a difference you can feel in the ride of the bike almost instantly. First introduced with Stan's legendary Valor rim, Stan's impact-absorbing RiACT technology has evolved to be more responsive and even more durable. The Crest CB7's new layup and rim shape allows for 10mm of radial compliance to absorb larger impacts. The new rim also matches the Valor's strength while using less material to save weight. And when it comes to the lateral stiffness needed for steering precision and control, the new CB7 layup delivers. Wider than the original Valor while still optimized for XC tire widths, the Crest CB7 keeps you in control and rolling faster. Stan’s backs up the technology in every Crest CB7 rim with one of the best warranties available, including lifetime crash replacement. Better by design, the Crest CB7 is the most advanced rim available for creating a lighter, stronger, more reliable, and faster rolling wheelset. - Designed for cross country racing and riding - Patented low-profile sidewalls and 23mm internal rim width - Ultra-light 325g (29") rim weight - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for easier tubeless setup and the best reliability - WideRight rim design optimized for 2.00 - 2.25-inch tires

R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. Product Benefits - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. 135mm x 10mm QR or 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub

R45D hubs combine our low-drag 45-tooth RingDrive system, a lightweight hub body, and our legendary made-in-house bearings. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the superior responsiveness of our RingDrive engagement system when you put the power down. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available

Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flick'able, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.

Plus size tires are a dilemma: All of a sudden you find yourself riding sections where you previously dismounted, and you're doing so at a good pace. That's a lot of fun. On the other side, it makes it pretty tough on your bike and especially the wheels. With the HX 1501 SPLINE ONE 35 DT have succeeded to deliver alloy wheels able to bridge the gap. Created with all of DT Swiss' know-how and passion, it is light and reliable but loves to smash into the rough like no other.

When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.

The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible

The ARC 1400 DICUT 48 delivers its full potential when your race turns nasty. In gusty wind conditions and on hilly, twisting courses, these wheels give you a decisive advantage, allowing you to stay in the aero position and save valuable power. Small and light riders will love the wheels' superior aero stability, making them a perfect choice for almost every terrain.

The ARC 1400 DICUT 62 is ideal for flat courses and gusty wind conditions. We developed it for aero stability, which adds to its versatility and makes it the category leader when it comes to low straight-line drag numbers while remaining easy to handle in windy situations. The ARC 1400 DICUT 62 combines SWISS SIDE's leading aerodynamic know-how with our unrivaled components technology.

Whisky GVL carbon tubeless wheels are built to bring an exceptional ride to your gravel and all-road exploits. Lightweight and stiff carbon rim construction keeps rotational weight down and efficiency up. The 23mm internal rim width pairs well with tires ranging from 32mm to 2.2-inches wide, so you can equip it with the right tire for any gravel ride. The GVL’s asymmetric rim profile equalizes spoke tension and angles for stronger, stiffer wheels that provide a more efficient and predictable ride. Whisky wheels are laced, tensioned, and hand-finished in Minnesota, where our experts have decades of experience building wheels one spoke at a time. Every wheel we sell comes with Whisky tubeless valves and tape in the box. And, we’ve chosen each component with a focus on performance, reliability, and serviceability. Whisky GVL wheels use DT Swiss 350 hubs, well-known for their balance of performance, weight, and tool-free serviceability. DT Aerolite spokes set the light-weight standard for wheel builders. We chose traditional, j-bend spokes and brass nipples for their durability and serviceability. Both are readily available at your local bike shop and ensure easy maintenance. These disc brake-specific wheels have an understated design with clean lines and subtle graphics that look great on any bike. Whisky GVL wheels are a versatile option, perfect for anything from gravel to cyclocross to road rides that get a little off the beaten path. - Asymmetric rim profile provides equal spoke tension and angle around the wheel - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors

15x142mm conversion kit for Hope Fatsno front hubs.

Wider and even lower in profile, the new Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling Wider but even lighter than the original Crest - More durable rim shape and alloy Most trusted tubeless system for easy setup and low maintenance - Legendary Crest climbing and speed in a high volume rim - WideRight optimized for XC tires

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher

Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty. - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings, DT Swiss EXP internals, HG Freehub, 142x12mm thru-axle compatible - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 24 - Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 686g

What It Is The SES 3.4 AR is the embodiment of the modern disc brake-only road wheelset. Aerodynamically optimized for high-volume tires (28 - 32mm), lightweight for long days in the mountains, high volume for all roads, and arguably the most versatile wheelset ENVE has ever made. Science & Insight In 2016 we launched the SES 4.5 AR, a wheelset ahead of its time. Since then, road riders, frame manufacturers, and tire makers have all caught the high-volume vision which has propelled the one-of-its-kind 4.5 AR to be our most popular wheel in North America where the high-volume all-road movement has gained the most traction. As more bikes are created that can accommodate tire clearances up to 32mm, we saw the need to create a more versatile, climber-friendly SES AR wheelset, and the SES 3.4 AR was born. Points of Differentiation - Real-world aerodynamics, optimized around 28mm to 32mm tubeless tires - Wide, Hookless Bead Anti-Pinch Flat Technology - Disc brake-specific materials and construction - Low weight leader in category - Tubeless-only design

Whisky Parts Co. Tubeless Rim Tape.

- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 26-inch x 1 3/8 - ISO Diameter: 590 / 26 x 1 3/8-inch - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

What It Is The ultimate everyday carbon fiber cycling wheelset and choice of Team Dimension Data. Who it's for Road cyclists and triathletes looking to minimize the trade-off between aerodynamics, lightweight, and stability. Why we made it Because from the moment the first prototypes made the rounds at ENVE, it's been the house favorite. The SES 4.5 rounds out the Smart ENVE System wheel line as a true mid-depth everyday cycling race wheelset. Additionally, the SES 4.5 features a refined shape and construction that yields better acceleration, cornering, impact resistance, and weight savings.

Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

The DT Swiss 240s 6-Bolt Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready

- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings

The DT Swiss 240s MTB Center Lock Front Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim

Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke, and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring a Durasync 6-pawl freehub with fast 10-degree engagement. The 100% CNC-machined hub shell and smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs with 6-pawl simultaneous engagement - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape offers easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires

Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels offered by Whisky. The No.9 30w rims have a 24mm internal width that supports a variety of tires from road plus to standard mountain sizes and feature hookless walls for easy tubeless setup and impact resistance. The No.9 30w wheels are light and wide, providing great versatility no matter where your ride takes you. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Includes Whisky tubeless valves and tape

In the early design phases of our Traverse Fattie 27.5, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a super nimble, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.

Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure

Ultra light bolt on thru axle, with a low profile 6mm head for Whisky forks and some others. See other manufacturers specifications for fitment questions. - Thread Length (mm): 12 - Thread Pitch: 1.5 - MT/CX: 125 x 15mm - MTB+: 135 x 15mm - Fat: 198 x 15mm - RD/CX: 120 x 12mm - Rear: 167 x 12mm

Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.

These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.

SPANK Industries Fratelli Tape is a special ultra-light polyamide, adhesive tubeless conversion tape, which is ideal for SPANK's patented OohBah profile rims. Thicker, less pliable tapes are often difficult or impossible when taping complex rim profiles. Fratelli tape makes tubeless set up simple, and adapts well to a variety of rim types, including sleeved and welded joints. 25mm width tape is suggested for rims up to 29mm internal width, and 30mm tape for rims 30mm internal width and greater. With adhesive properties unaffected in a wide temperature range, Fratelli tape is also perfect for winter riders, or those in exceptionally hot environments. - Material: Ultra Thin Polyamide - Width: 25mm or 30mm - Features: high temperature range adhesive, ideal for complex rim profile Installation: - Affix tape all the way around on the right side snug against the bead hook - Then repeat a second circumference around the left side, providing double-thick coverage over the spoke holes - Use a red-hot awl or similar to pierce the valve hole

Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?

Our benchmark-setting Aero+ rim matched to a punchy mix of top end aerolite and laced to premium Ratchet System hubs makes for a wheel that delivers in all riding situations. Fitting 28mm tires on its wide rims will give you all the comfort and grip needed for extended rides on mixed surfaces. At the same time, in combination with 25mm rubber, the ERC 1400 SPLINE will aero optimize your race bike, ready for you to set your own, new benchmarks.

Unsure what will happen on your group ride? Mountains, hills, or flat sections? Water from below, water from above? You needn't worry — the PRC 1400 SPLINE 35 has it covered. High-end bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them.

Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail tires

Stan's Arch CB7 is the ultimate carbon trail rim. It's light enough to respond instantly from the first pedal stroke, and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape offers easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires

When we set out to design our R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive system with 45 teeth for lower drag and near instant engagement with a lightweight hub body and our legendary made-in-house bearings. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

What It Is The ultimate everyday carbon fiber cycling wheelset and choice of Team Dimension Data. Who it's for Road cyclists and triathletes looking to minimize the trade-off between aerodynamics, lightweight, and stability. Why we made it Because from the moment the first prototypes made the rounds at ENVE, it's been the house favorite. The SES 4.5 rounds out the Smart ENVE System wheel line as a true mid-depth everyday cycling race wheelset. Additionally, the SES 4.5 features a refined shape and construction that yields better acceleration, cornering, impact resistance, and weight savings.

Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless setup and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape

Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape

Wheels are the first point of contact between you and your bike, and the trail you’re riding on. And while wheel sizes and standards continue to develop significantly year on year, often to both the rider and the industry’s dismay, very little innovation has been seen in the compliancy and responsiveness of the wheel as this first, most important contact and conductor. What Spank has seen in recent years is that bike suspension is continuously evolving and adapting to compensate for stiffer frames and more rigid, deeper profile carbon fiber rims. This overall stiffer rig is being softened, or counter-acted by both bike suspension, and tire design — not to mention the ever lower and lower tire pressures riders are running. Rider position (wider, lower, more forward) is also being impacted directly by the bike frame and cockpit geometries which is constantly aiming for a better riding feel. So surely it is overdue time to re-examine how the engineering of the wheel can become an active contributor to the efficiency of the overall set up. Spank Industries has done just this. - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles. - Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty