Filter By:
Suspension

$483.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Highly tunable DebonAir spring offers a consistent feel throughout the travel
- Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look
- Offset: 44mm

$1,054.00
- 35mm chassis at home on the trail - stiff, playful and light, really light
- ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height
- Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature.
- RockShox premium short fender included

$17.00 - $72.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

$537.00
Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Welcome Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range.
Features
- New graphics are easy to read and make a fresh impact
- Specifically tuned for smaller riders
- External rebound adjustment
- Offset: 40mm

$473.00 - $483.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping.
Features
- New graphics package with E-MTB endorsement option (15x110mm)
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fits Tires up to 2.8"
- Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look
- Highly tunable Solo Air spring

$949.00
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail
- Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust
- Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
- Maxima Plush damping fluid reduces friction and silences damper noise
- Ultimate foil graphics package

$499.00
The Reba is no prima donna. Even though it's available with a host of race-worthy technologies, this cross country fork doesn't need the promise of a podium to give its all. It expects to be ridden every day, which is just what you'll want to do once you experience its supreme versatility. From quad-burning climbs to grin-inducing descents, the Reba is the ultimate trail warrior for daily duty.
- 9mm QR
- 40mm offset

$1,107.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height
- Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature.
- RockShox premium short fender included

$1,039.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Genuine Kashima Coating on upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT4 damper and FLOAT air spring

$713.00
The ZEB is built with a stout, 38mm chassis and features the updated DebonAir spring with the performance of the Charger R damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance.
- New, 38mm chassis for increased stiffness and rider confidence
- Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- New, price point Charger R cartridge damper featuring an easy-to-adjust damper with just rebound adjustment
- Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
- Maxima Plush damping fluid reduces friction and silences damper noise

$896.00
- Performance-packed, featuring an updated 38mm chassis, now compatible with new Pressure Relief Valves.
- 38mm chassis for increased stiffness and rider confidence
- Charger RC damper featuring Low Speed Compression adjust
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
- Compatible with new Pressure Relief Valves
- Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride
- Bolt-in torque cap adapters now included for the use with standard hub end caps

$537.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before.
Features
- New graphics package for a fresh, premium look
- Highly tunable Solo Air spring
- TwistLoc and OneLoc remote compatible

$779.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.
- Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included)
- Noise management system for near silent performance
- Integrated air assist for progressivity and bottom-out control
- External preload adjuster to dial-in sag and firmness off the top
- Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers
- Additional springs sold separately to fine-tune and adjust for rider preference
- Rake: 44mm

$579.00
With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance.
- 38mm chassis for increased stiffness and rider confidence
- Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound
- Highly tunable DebonAir air spring offers a consistent feel throughout the travel
- Maxima Plush damping fluid reduces friction and quiets damper noise
- Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender
- Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

$949.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Genuine Kashima Coating on upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT4 damper and FLOAT air spring

$1,099.99
The Cane Creek Helm MKII Coil Suspension Fork features an upgraded damper design for increased support and control.
- Compression and midvalve circuit offer increased support and control
- SKF oil seal head cartridge and wiper seals are low friction
- Damping features include: high speed compression, low speed compression, low speed rebound
- Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), low speed rebound (10 positions), indexed travel adjust system, spring pre-load adjust
- Lightweight coil spring
- 55 lb Lightweight Coil Spring included from factory

$1,099.99
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness.
- D-Loc 15mm bolt-on thru-axle

$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Black anodized upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT GRIP damper and FLOAT air spring
- Performance Series black-on-black graphics package

$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements

$949.00
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Factory delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you.
- 700c chassis with clearance for large volume tires (50 mm max)
- Kashima Coated 7000 series aluminum stanchions and 12x100mm bolt-on thru axle
- FLOAT EVOL Air Spring and FIT 4 damper, featuring three on-the-fly settings - Open, Medium, and Firm
- Lightweight air spring optimized for short-travel
- Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels
- Integrated full fender mounts (700c x 45 mm max with fender)

$210.00 - $322.00
An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance.
- 80-120mm travel
- External rebound
- TurnKey lockout controls
- Fast Black upper tubes
- Motion Control RL damper
- Compatible with OneLoc remote
- Solo Air spring

$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

$729.00
The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard.
- Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end
- Legendary Bomber durability with 36mm stanchions
- Buttery and easy-to-use GRIP damper
- Tapered steerer tube for maximum stiffness
- Adapters available for 15 x 100mm axle
- 1.5 Tapered steerer
- Offset: 37mm

$537.00
Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Motion Control damping featuring low-speed compression adjustment to firm
- Chassis is derived from the renowned Pike fork
- New graphics package for a fresh, premium look

$1,019.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

$969.00
34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time.
- Genuine Kashima Coating on upper tubes
- FLOAT EVOL air spring

$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability.
- The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs
- Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
- GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance
- FLOAT EVOL air spring technology increases negative air spring volume, optimizing small bump sensitivity
- Direct mud guard mount
- Genuine Kashima Coating on upper tubes
- 27.5: 723mm peak tire diameter

$1,019.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
- Kabolt Thru Axle

$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately.
- Black anodized upper tubes
- FIT GRIP damper and FLOAT EVOL air spring
- Three on-the-fly compression damping positions: Open, Medium, Firm
- Performance Series black-on-black graphics package

$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
Page 1 of 3
Next page