Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
- High Performance Brake Pads - Disc Pad Material: Organic
$44.00 - $56.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road
Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g
The Neo-Retro is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability. - Compatible with drop bar levers and short pull mountain bike levers - Modeled after the popular Mafac Tandem cantilever - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA
$15.99 - $17.99
Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.
$133.00 - $174.00
- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA
TRP Disc Brake Pads - Sold as one pair per wheel - Compound most effective in dry conditions, may wear quickly in wet/muddy conditions - Brake pad composite is Resin with Metal Fibers - Resin with Metal Fibers pads are compatible with Resin-Only type rotors as well as standard rotors - Compatible with Tektro Draco, Auriga, and Gemini (models HD-M740/M730/M520/M521/M510/M500/M501, HD-M290/M291/M285/M286, HD-T710/T520/T530/T290/T285/T525, HD-E715/E530/E525/E520/E500, MD-M500/M300/M280, and MD-C510/C40)
Jagwire's Mountain Pro Brake Pads are a nice upgrade for your linear-pull and cantilever brakes. They feature cartridge-style pads that are easily replaced when the time comes. And the pads are made of Jagwire's tried-and-true all-weather compound for excellent stopping and durability.
$12.49 - $19.99
Trying to get a little extra traction on shifters and brake levers has inspired home-brew mechanics to experiment with skateboard deck tape, hot glue, or slide on brake lever grips. Katie Compton actually went so far as to combine sand and superglue to ensure maximum grip in any conditions. While those solutions are pretty kick-ass, we try to make it a little easier with our Lever Grippies. Just stick ‘em on for more sticktion.
These adapter brackets are designed to work with the Post Mount style brake mounts.
Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length
$16.80 - $19.99
For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters
2-piece center lock rotors for use with Campagnolo hydraulic brake systems. - Rounded external edge prevents cutting of skin in case of contact with rotor - Inner aluminum spider maximizes heat dissipation - EKAR rotors are strong 1.85mm thick stainless tempered steel - Strong, durable, light & resistant to corrosion Specifications: - Rotor Type: Two Piece - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds
Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually
- Lightweight aluminum spider design improves stability and durability - Durable stainless steel resists corrosion - Compatible with all disc brake pad compounds
Lock rings for all TRP Centerlock Rotors
Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Shimano disc brakes.
Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.
$17.99 - $29.99
These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate
Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g
With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.
The cores of brake performance are consistency, reliability, and trust. And, with G2 R, we focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed "Mini-Code" power and a whole suite of SRAM standard features at an absolutely unbeatable value. - Power organic pads give riders both feel and bite - Engineered for easy installation and maintenance - Tools-free reach adjust for quick personalization
$41.00 - $54.00
Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation
Page 1 of 9 Next page