Packs/Racks/Baskets

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Capsule Premio is our BOA-powered saddlebag option for those that prefer more structure and internal volume than what a seat roll has to offer. A high-strength thermoformed shell creates a modular structure with two internal dividers that help keep everything organized. The capsule is secured to the bike using the BOA Closure System, and features a Rail Guard for superior grip and protection of the saddle rails. The zipper is a YKK locking model that bisects the lower third of the bag. Our designer chose this low position to make it easier to access the bag while it's still attached to the saddle; a key difference between a seat bag and a seat roll. - High strength Thermoformed shell - Boa Closure System with Guide - Rail Guard protects and grips saddle rails - YKK Locking Zipper - NO Velcro to damage your seat post or inner short legs - 625cc Internal Volume

Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

The Anything Bracket Pack is specifically designed for use with our Anything Bracket and Anything Bracket Mini, but you can also strap it around your seat rails and use it as a seat bag to hold a tube, CO2, multi-tool, or anything else you want to stash in there. - Constructed of 200D nylon - Mounts to Anything Bracket, Anything Bracket Mini or saddle rails - Roll-top closure - Includes strap - Weight: 50g

The Timberjack Kids Framepack is the ultimate place for your young adventure junkie to stash their stuff. Whether filled with gear or treasures, this pack is the perfect compliment to every young heart’s desire to explore. - Constructed of rugged 600D PU coated Poly fabric, with Velcro strap attachments for a secure fit - Non-zipper bag opening uses Velcro closure with glove-friendly tab for easy access - Designed specifically to fit the Salsa Timberjack 24 kids bikes

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

Designed with minimalist riding in mind, the Anything Bracket mounts to standard or Three-Pack frame bosses and works directly with the Anything Pack, allowing you to carry essential items on the bike. - Combines placement of the Anything Pack and standard water bottle cage in a single location - Mounts to standard or Three-Pack bosses on forks and frames - Bracket is constructed of lightweight 6061-T6 aluminum - Includes Anything Pack, mounting hardware and strap - Anything Pack features a roll-top closure for easy access

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware, Anything Cage Bag, and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag. - Keeps your ride essentials in easy reach - Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system - Extremely weather-resistant welded design

The EXP Series Fat Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Designed to fit: Mukluk Aluminum, Mukluk Carbon, Blackborow, and Blackborow V2

Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Fits Woodsmoke, Timberjack, and Fargo bikes

The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Revelate Designs Polecat waterproof drybag is the perfect companion for your fork mount cargo cage. It is radio frequency welded and for a significant weight savings over other manufacturing methods. The base of the bag has a contoured low profile which eliminates a high wear spot at the outer edge. The back of the bag is reinforced with urethane Hypalon to protect from bolt heads and abrasion from the cage. Reinforced base and outer edges make this bag worthy of all the elements long distance touring can bring. To secure the Polecat it features a urethane coated daisy chain which easily fits plastic buckles and straps. Waterproof Contoured sides Roll top closure Urethane Hypalon reinforcements Urethane coated webbing daisy chain. Fits fork mounted racks like the Salsa Anything Cage

The Gas Tank is a high-end, high-volume top tube bag for carrying a ton of food and other gear. It offers substantial storage in an easy access case. Zip open a side for one-handed access while riding or open up both when stopped for full panel access to the contents. Fill it with M&M's, tools, a camera, bear spray, and whatever you need to have close at hand. Features: - One-handed zipper access while riding - Wrap-around, water-resistant zipper to keep your gear dry - Fully padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Hook and loop interior divider for organizing small stuff - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 9" - Height at stem: 5" - Width at stem: 2.5" - Tapers down to 1.5" tall and 1.5" wide along the top tube Specifications: - Weight: 3.5 oz. - Volume: 70-80 cu. in. - Materials: VX42 X-pac, 1050-denier domestic ballistics nylon, 420-denier yellow lining, closed cell foam padded tube sections

The Mag-Tank takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages! The Mag-Tank is just a hair smaller than Revelate's Gas Tank to prevent leg movement from hitting the edge of the flap opening. Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Features: - One-handed access while riding - Side panels stiffened with HDPE plastic sheets - Wrap around panel is padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Beefy top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 8.5" - Max height: 5" - Width at stem: 2.5" - Tapers down to 2.5" tall and 1.5" wide along the top tube Specifications: - Weight: 4.5 oz. - Volume: Approximately 65 cubic inches - Materials: VX21 & 42 XPac, 420-denier yellow and red lining, closed-cell foam-padded tube sections, HDPE sheets

The Bolt-On Mag-Tank is compatible with top tube bolt bosses found on many brands. This bag has both a magnetic and buckle closure for one-handed convenience and security. Grommets on bag bottom allow bolt-on mounting to top tube Velcro secured, padded bag bottom conceals mounting bolts Stiffened side panels help the bag hold its shape Interior lined with yellow fabric for greater visibility Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolt Features 2 sets of grommets. First grommet at 76mm (+/- 2mm) from steer tube, second at 100mm (+/- 2mm) Distance between grommets based on standard water bottle distance, 64mm

A 100% water-proof bikepacking handlebar bag with dual side roll closures that allow for a wide range of carrying options. Adjustable handlebar offset using stack-able spacers, provides room from cable and lever interference with zero abrasion against bag fabric 100% Water-proof RF welded seams Four-point, Jones Loop Bar mounting (with separate kit) Manta Flap allows user to shove stuff between the flap and the main bag Features two rows of daisy chain webbing for custom configurations Foam spacer block at head tube/crown attachment (bag does not make contact with the bike) Fiberglass cross stiffener adds rigidity to the mount area and provides structure when packing and unpacking Fiddle free detach and mounting

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.

The Revelate Designs Spinelock Seat Bag integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system built for stability. Innovative Spinelock stability system completely eliminates side to side sway Two mounting positions to accommodate seatpost setback and saddle adjustments Quick release bag from bike One way, low profile, air purge valve Carbon seatpost friendly Top mounted external webbing and bungee for additional storage

The Terrapin System is a holster-like mount with integrated RF welded drybag. The load can be quickly removed from the bike for packing/unpacking. With Indie-Rail, each saddle rail is cinched down hard to the sides of the bag, virtually eliminating side to side bag sway without the need for external hardware. Indie-Rail attachment system and active camming hardware - Super stable without added hardware Radio frequency welded drybag with air purge valve Protective external plastic bottom frame sheet Aluminum hardware at high stress points Composite internal top frame sheet Hypalon slots on drybag for rear light attachment Foam stiffened side panels with fiberglass compression stays

The Rear Top Tube Bag is the perfect add-on to maximize storage on your bike when frame space is limited, all other attachment points have been used or you want to organize tools, spares, food, or other accessories into a separate compartment. A simple zip closure allows for easy one-handed access. Hypalon MOLLE accents on the base and rear of the bag each provide two placements for the double-sided velcro straps, allowing you to tailor the bag to be ideal for your setup. Handmade in our Yorkshire workshop from 100% waterproof textured nylon, with a nylon lining and finished with the classic vegan-friendly PU leather Restrap label. Weight - 65g Capacity - 1L - 100% handmade in Yorkshire, England - Capacity: 61 cu in (1L) - Weight: 70g All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The 1 Litre City Stem Bag fits any folding bicycle. Made from tough waterproof fabrics, it provides a simple solution for carrying a water bottle, snacks, or other accessories. The bag moves with the stem and does not impact the folding mechanism of the bike. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, and made from vegan-friendly PU. Weight - 96g Capacity - 1L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

Designed to fit the M and H style Brompton handlebars, the 1.2 Litre City Bar Bag is made from tough fabrics and is tape sealed - making it completely waterproof. Perfect for carrying keys, phone, and wallet. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 90g Capacity - 1.2L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The City Saddle bag is designed for any folding bicycle. Constructed from waterproof fabrics, it comes in two sizes to accommodate a range of gear like clothing, off-the-bike footwear, or tools. Both sizes are tape-sealed and completely waterproof. The bag also features an extendable bottom stabilising strap which fits easily around the suspension block on all Brompton bicycles. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 110g Capacity - 1.2L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The Adventure Race Stem Bag offers a highly adjustable and accessible storage solution for nutrition, tech, clothing, and more. Multiple Hypalon MOLLE mounts and double-sided velcro loops deliver a huge array of mounting possibilities. Our innovative, single-pull drawcord closure, allows for effortless one-handed access into the bag when on the move. One upward pull on the Hypalon tab or shock cord opens or closes the bag respectively, whilst the internal stiffener aids easy access and helps the durable and waterproof VX21 outer hold its shape Stretch mesh pockets offer additional external storage and an extendable nylon interior provides the option to boost the internal capacity when resupplying for the next leg of your journey. Both the shock cord and our signature Race Range heat-pressed logo are reflective, assisting visibility in low-light conditions and at night. Capacity - 1.1L Weight - 86g - Attaches to stem and handlebar with nylon straps - Made of X21, a technical waterproof fabric with waterproof zippers - 100% handmade in Yorkshire, England All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

This spacious yet compact bag is the ideal accompaniment for day rides. Elasticated side pockets and the unique canister shape mean you'll easily have room for tools, tubes and extra clothes. The Canister Bag features a rear shock cord retention strap along with a Hypalon loop to attach a front light, which is perfect for early starts or late finishes. Handmade in our Yorkshire workshop from 100% waterproof textured nylon, with a nylon lining and finished with the classic vegan-friendly PU leather Restrap label. Weight - 116g Capacity - 1.5L WATERPROOF MATERIALS A specially developed combination of technical materials like VX21 and 1000D textured nylon work in conjunction with coated nylon linings to keep the worst of the elements at bay. VEGAN FRIENDLY Our signature brown Restrap label may look like leather but fear not - no animals have been harmed in the making of our products. PU leather or heat-pressed labels mean our kit not only looks great, but is cruelty free too. FITS ANY BIKE Our bags are designed to be as universal as possible, providing a modular luggage system for the needs of any rider, on any bike, on any journey. HANDMADE IN THE UK Our bags are handmade by our team of highly skilled machinists and rigorously tested in the Yorkshire dales. We control the manufacturing process from start to finish to guarantee the quality of the products that leave our factory door. LIFETIME WARRANTY We stand by our products and subsequently offer a comprehensive lifetime guarantee against all defects in materials and workmanship. No matter how many journeys your bag has been on, if it's on us we'll fix it. SPECIALIST ADVICE & AFTERCARE We design, we make, we ride. Our team is full of cyclists that are passionate about our products and the adventures they are for. If you need any guidance or assistance before, during or after your trip we are happy to offer expert advice.

Our sleek roll-top panniers are designed for strength, stability and endurance. Available in small and large for both rear and front racks, they're fitted with side-release buckles and contain a fully adjustable hook system for easy mounting onto 10-16mm rails. Reflective detailing enhances your safety, whilst their 100% waterproof materials ensure their contents remain dry and secure. The large pannier also has space for a clip-in laptop sleeve. Check out the sleeve here. Hand made in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 910g Capacity - 22L WATERPROOF MATERIALS A specially developed combination of technical materials like VX21 and 1000D textured nylon work in conjunction with coated nylon linings to keep the worst of the elements at bay. VEGAN FRIENDLY Our signature brown Restrap label may look like leather but fear not - no animals have been harmed in the making of our products. PU leather or heat-pressed labels mean our kit not only looks great, but is cruelty free too. REFLECTIVE DETAILING As much as we'd like to always ride in ideal conditions, we know that's far from the reality. Reflective details aid visibility in low light, poor weather and outright darkness so when the day draws to a close, your adventure doesn't have to. HANDMADE IN THE UK Our bags are handmade by our team of highly skilled machinists and rigorously tested in the Yorkshire dales. We control the manufacturing process from start to finish to guarantee the quality of the products that leave our factory door. LIFETIME WARRANTY We stand by our products and subsequently offer a comprehensive lifetime guarantee against all defects in materials and workmanship. No matter how many journeys your bag has been on, if it's on us we'll fix it. SPECIALIST ADVICE & AFTERCARE We design, we make, we ride. Our team is full of cyclists that are passionate about our products and the adventures they are for. If you need any guidance or assistance before, during or after your trip we are happy to offer expert advice.

The Restrap Full Frame Bag allows you to easily increase the load out you carry for comfortable bikepacking and touring. The bags come in three sizes, designed to fit most standard frames and geometries. Two Aquaguard YKK zips on the drive side of the bag allow easy access to the top and bottom sections of the bag, with internal velcro dividers to separate the compartments. These dividers aid the structure of the bag when fully packed, but also fold away to allow use of the full internal space of the bag if needed. The non-drive-side of the bag contains a document pocket, useful for storing smaller items. The bag is made from durable, textured nylon outer and VX21 fabrics, with a wipeable lower section that means the bag is easy to keep clean when riding off-road or in adverse weather. Rubberized strapping provides extra grip to the frame and webbing straps, with easy-to-use cam locking buckles, keep the bag sitting securely and free of movement while riding. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 275g / 322g / 368g (small/medium/large) Capacity - 6L / 7.5L / 9L (small/medium/large) - Body is made out of 1000D Textured Nylon & VX21 fabrics - 100% handmade in Yorkshire, England - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The Adventure Race Bar Bag is the ideal handlebar storage solution for ultra-distance riding, audaxes, and races. The minimalist hardshell holster is constructed with a WX21 technical outer and durable nylon inner lining with Hypalon accents. The holster is shaped to optimize performance, whilst keeping weight to a minimum. Foam spacers and spring-loaded cam locks provide an easy and reliable attachment to your handlebars, whilst a reflective elastic cord retention strap aids stability around the head tube. A 100% waterproof 7L Dry Pack has been designed specifically for the Race Bar Bag, featuring a roll-top closure, reflective detailing, and stretch mesh side pockets that provide accessible storage for food, gloves, and other essentials on the go. Capacity - 7L Weight - 320g - A mini D-lock holster sits between the two compartments - 100% waterproof - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

Ideal for shop runs, off road adventures or audaxes, the Bar Pack is the perfect all day companion. Two fully waterproof roll top compartments provide 10 litres of capacity with a hypalon closure, securing the front compartment and providing a mounting slot for a clip-on front light or additional strapping. A mini D-lock holster sits between the two compartments, with the front compartment closure doubling as a securing strap for a lock for any urban excursions. Structural rigidity is provided by an internal stiffener, a compact pack is guaranteed at all times due to the side-release tension and buckle system. An additional hard shell back provides further rigidity and a MOLLE adjustable headtube retention system guarantees a secure fit to your bike. Foam spacers and spring-loaded cam locks provide a stable and reliable attachment to your handlebars an elasticated drawcord provides perfect on-the go storage for gloves, jackets and other accessories. Handmade in our Yorkshire workshop from 100% waterproof textured nylon, with a nylon lining and finished with the classic vegan-friendly PU leather Restrap label. Weight - 585g Capacity - 10L WATERPROOF MATERIALS A specially developed combination of technical materials like VX21 and 1000D textured nylon work in conjunction with coated nylon linings to keep the worst of the elements at bay. VEGAN FRIENDLY Our signature brown Restrap label may look like leather but fear not - no animals have been harmed in the making of our products. PU leather or heat-pressed labels mean our kit not only looks great, but is cruelty free too. FITS ANY BIKE Our bags are designed to be as universal as possible, providing a modular luggage system for the needs of any rider, on any bike, on any journey. HANDMADE IN THE UK Our bags are handmade by our team of highly skilled machinists and rigorously tested in the Yorkshire dales. We control the manufacturing process from start to finish to guarantee the quality of the products that leave our factory door. LIFETIME WARRANTY We stand by our products and subsequently offer a comprehensive lifetime guarantee against all defects in materials and workmanship. No matter how many journeys your bag has been on, if it's on us we'll fix it. SPECIALIST ADVICE & AFTERCARE We design, we make, we ride. Our team is full of cyclists that are passionate about our products and the adventures they are for. If you need any guidance or assistance before, during or after your trip we are happy to offer expert advice.

Part of the #carryeverything range, our rackless saddle bag connects securely to your seatpost for bike packing, touring or commuting. With no mounts or screws, the bag attaches in seconds to any bike. The holster fits up to a 14 litre dry bag and is secured with a patented magnetic buckle that's easy to adjust, even whilst wearing gloves. The bag is hardcase for easy loading and is fastened with reflective military paracord and reinforced eyelets. Made from textured nylon and with nylon webbing for extra strength, this product is made to last. Hand made in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 630g Capacity - 14 Litres (14 Litre version with dry bag included) WATERPROOF MATERIALS A specially developed combination of technical materials like VX21 and 1000D textured nylon work in conjunction with coated nylon linings to keep the worst of the elements at bay. VEGAN FRIENDLY Our signature brown Restrap label may look like leather but fear not - no animals have been harmed in the making of our products. PU leather or heat-pressed labels mean our kit not only looks great, but is cruelty free too. FITS ANY BIKE Our bags are designed to be as universal as possible, providing a modular luggage system for the needs of any rider, on any bike, on any journey. HANDMADE IN THE UK Our bags are handmade by our team of highly skilled machinists and rigorously tested in the Yorkshire dales. We control the manufacturing process from start to finish to guarantee the quality of the products that leave our factory door. LIFETIME WARRANTY We stand by our products and subsequently offer a comprehensive lifetime guarantee against all defects in materials and workmanship. No matter how many journeys your bag has been on, if it's on us we'll fix it. SPECIALIST ADVICE & AFTERCARE We design, we make, we ride. Our team is full of cyclists that are passionate about our products and the adventures they are for. If you need any guidance or assistance before, during or after your trip we are happy to offer expert advice.

Planet Bike's Little Buddy is the perfect friend to bring along on every ride. It's made of tough material and has a padded, white interior to protect, and make it easy to see your things. Its 44 cubic inches of capacity handle all your essentials. It's also got a diagonal zipper for easy access, a taillight strap (lights sold separately) and reflective piping for visibility.

Planet Bike's Big Buddy is the perfect friend to bring along on every ride. It's made of tough material and has a padded, white interior to protect, and make it easy to see your things. Its 80 cubic inches of capacity handle all your essentials. It's also got a diagonal zipper for easy access, a taillight strap (lights sold separately) and reflective piping for safety.

Planet Bike's Snack Sack attaches to your top tube to keep your gear within easy reach. It's made of tough material and has a padded, white interior to make it easy to see your things. Its 43 cubic inches of capacity handle all your essentials. It's also got a dual zipper for easy access and reflective piping, too. Dimensions: 7 x 3.5 x 2 inches

Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.

- Tool Carrier - Sleek tool holder designed to securely hold the Park Tool MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool - Can be mounted or strapped to most bike frames (hardware not included)

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

The Takeout Basket conveniently carries a six-pack, five burritos, eight chinchillas, or extra layers. - Features integrated U-lock carrying slot - Side eyelet for mounting a front light - Fits 25.4 – 31.8mm handlebars - Load Limit: 12lbs

The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty

Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs  - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty

The PDW Gear Belly is a super-stable and easily accessible way to carry gear up front. The sturdy handlebar mounting bracket is designed and manufactured in Germany by Rixen & Kaul and is compatible with 22.0 – 31.8mm straight, riser or flared drop handlebars. Two interior straps hold gear into place. Three exterior straps cinch the Gear Belly nice and tight. All buckles feature cam locks to insure that cargo is extra-secure. A double ended waterproof dry bag is included with every Gear Belly and makes for the perfect fit. Exterior daisy chains create space for last-minute attachments. The sturdy and flexible exterior of the Gear Belly is finished with an easy-to-clean black tarpaulin, so go on and head into the muddiest of adventures! Rated for up to 7kg/15lbs of cargo. - Waterproof roll top drybag straps to handlebar harness - Fits 22.0 – 31.8mm handlebars - Opening at both ends for easier gear access - Durable and abrasion-resistant tarpaulin exterior - Daisy chain for last minute attachments - 15lb load limit