Wheels

- Designed for all-around Trail/Enduro use - Ideal for 2.3-2.6" tires and bikes from 110mm to 180mm travel. - Depth –20mm - Inner Rim Width –30mm - Asymmetric External Molded Spoke Holes - 3mm Offset for more balanced spoke tension - Wide Hookless Bead Anti Pinch-Flat Technology - No inserts required or recommended - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6'' tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asymmetrical design, builds into an incredibly durable wheel that brings added confidence to every ride. Specs: - Rim Material: Aluminum - Rim Eyelets: No - Valve: Presta - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready

No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

The ARC 1400 DiCut wheels also benefit from the AERO+ profile supporting safe riding in the aero position through optimal aerodynamics. The combination of new and proven aero components allows cyclists to control many riding situations at high speeds. - AERO+ optimized rims by Swiss Side - Stainless steel bearings

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency - Ratchet EXP OS, optimized for the requirements of an eMTB, with a bigger threaded ring for direct acceleration through a torque-resistant freehub system

Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.

Trainer Caps allow thru-axle bikes to be used with most wind, magnetic or fluid cycling trainers. Cold weather and short days are never far from a Minnesotan's mind so Wolf Tooth engineers created Trainer Caps to reduce barriers to winter workouts. Non-drive side axle caps are joined by drive-side plugs that can be installed or removed without tools to make the prospect of hopping on the trainer a little more bearable. - Compatibility: Wolf Tooth Rear Axles (not compatible with rear axles from other manufacturers) - Plug has O-ring retention – no tool required

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 146mm - 1 axle per bag

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

Champion 2.0 Black Spokes - One 264mm spoke = 7g

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.

Hub Adapters for all Oozy hubs and 2016 Spike hubs.

SHAMAL Carbon Disc Brake wheels are a renewed icon that maintains its blazing, indefatigable soul, like the wind from which it takes its name. The wide rim channel makes this wheel a complete all-rounder for road or gravel use on long biking adventures. - Carbon rim with unidirectional finish and a differentiated front/rear profile, modern rounded profile, new aluminum hubs, cup-and-cone bearing system - 21 mm internal rim width supports multiple tire sizes and uses - 2-Way Fit profile allows for both clincher and tubeless tires - Black aluminum monolithic disc hub with cup-and-cone bearings Specifications: - Hub/Brake Compatibility: Center-Lock Disc - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Rim Width (Internal): 21mm - Tire Type: Tubeless Ready Clincher

Adapts HEX 32 J-Type F15/20 Front Hubs to 12x100. Compatible with: - HEX J-Type 32H non-Boost Front Wheels Not compatible with: - HEX 28 Straightpull or HEX Gravel Front Hubs - HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs

Replacement end caps for Stan's NoTubes rear hubs with XD Driver.

The EC70 AX wheels connect EC70 carbon rims to our proven X5CL hub with 28 3x double butted Sapim straight pull spokes. End cap and axle components are available for all major industry standards. Wide, 24mm internal rims are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, single track forays and unrelenting gravel races. Our Easton Overland team and SDG Muscle Monster team riders have put these wheels to the test, racing prototypes at DK200, with Amity Rockwell taking the DK Queen title and Amanda Nauman finishing 6th, while at Lost and Found 2019 Michael Van Den Ham came in 4th and Craig Richey took 6th.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

What It Is The G27 is the G23's little big brother. Smaller in diameter and lighter in weight, the G27 is designed for the higher-volume tires demanded by many riders on rougher and looser terrain. At 320 grams, our lightest tubeless rim is 27mm wide and designed for tires marked 27.5 or 650B. Armed against pinch flats with the patent-pending Wide Hookless Bead, the G27 is at home off-road and capable on tamer stretches of singletrack. Who It's For Those seeking the challenge of drop-bar riding over more technical terrain that is typically frequented by mountain bikes will benefit from the additional air volume, durability, and anti-flat performance benefits provided by the G27. If your path leads you to rough roads, single tracks, and multi-day bikepacking adventures, the G27 may be for you. Why We Made It There is a place between road and mountain that is open to discovery. Beyond the range of your trail bike or the capabilities of your road bike. Terrain littered with contradicting challenges and demanding requirements are at odds with the bikes and products available today. We built the new G27 to thrive in this new environment because insights gained through building the world's best road and mountain bike rims told us that the perfect combination did not exist in our stable, or in our opinion, anywhere at all. The higher volume and lower pressures would demand MTB toughness and flat resistance, while big days and long miles would require the light weight and efficiency of a road machine. Above all, the combination of rough and rigid would require a wheel with the ride quality to make those long miles enjoyable and multi-day treks possible.

Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell, and all driveshell internals for a plug-and-play swap. Micro Spline Driveshell Instructions - Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX - Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Replacement rear skewer - Spacing: 135mm - Material: Steel

- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell and all driveshell internals for a plug-and-play swap. Micro Spline Driveshell Instructions - Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX - Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.

- Colored rim decal kits to personalize your ride - Decals to fit 2 100w 26-inch rims

Ultra-light, bolt-on thru-axles, with a low-profile 6mm head for use on Whisky forks and others. They are also available in some common rear frame sizes. See manufacturer's specifications for fitment questions. - Thread Length: 12mm

Spank 350 Vibrocore rear wheels are laced to the brand new SPANK HEX Drive Hub, with 102T 6-pawl ratchet offering 3.5 degrees of engagement - that's literally almost instant pick-up. The low profile, radially compliant alloy rim injected with SPANK's award-winning Vibrocore to add torsional strength and lateral stiffness, offers a smooth and highly responsive ride feel. Hand-built to A-Class specifications, the 350 Vibrocore wheels with SPANK Hex Drive hub is the premium offer from the SPANK wheelhouse and is trusted by pros on the UCI DH World Cup and Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - Vibrocore™ inner well reduces the transmission of harmful vibration frequencies & increases the fatigue life of the rim - 30mm internal width is versatile fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles Rim Specifications: - Hole Count: 32/28 - Inner Width (mm): 30.5 - Outer Width(mm): 35 - Profile Height: 17 - Tyre Fit: 2.0" to 2.6"

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - One-piece design - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6 mm hex wrench required for installation

Salsa's Ti Flip-Offs are as beautiful to the touch as they are to the eye. Lightweight. Smooth. Recommended for road use or rigid front mountain bike use only. Available in a whole host of colors. - Beautifully machined and hand-friendly - Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter - More than just eye candy, they’re hand candy, as well - Weight: 40g

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36-tooth ratchet engagement. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

The reliable rim with an ideal price-to-performance ratio! The jack-of-all-trades of road rims: light, wide, and with an ideal price-to-performance ratio. The R 460 works perfectly with wide tires and will deliver many unforgettable rides on the road thanks to its reliability.

Sta Tru Rear Wheel - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 16-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 305 / 16-inch - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

Sta Tru Rear Wheel - Single Wall rim - Wheel Size: 18-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 355 / 18-inch BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance.

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance.

HG 1800 Spline wheels help you participate in rides again; commute to work, plan longer trips, or simply discover the joy of cycling. E-road bikes are there to assist riders to keep going. In doing so, the wheels undergo higher loads and torques on longer distances, due to the extra weight and power from the specific frame/motor constructions. Hybrid Road wheels are built to assist with these additional loads by increasing the strength of the individual components that make up the wheel. - Aluminum, sleeved rim joint rim - Hooked bead, tubeless ready - Inner width of 24 mm supports tires up to 50 mm - 25mm Rim Height - 370 Spline hub - DT Swiss tubeless ready tape installed, DT Swiss tubeless valve and valve guard included

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

Campagnolo BORA WTO 33 Front Wheels. Each component of these wheel has been optimized in the wind tunnel in order to improve aerodynamic performance. The wheel features carbon rims with a unidirectional aerodynamic finish, new aerodynamic aluminum hubs, and the ceramic USB cup-and-cone bearing system: every design choice has been made with a view to optimizing performance. The profile of the rim, which has an internal width of 19mm, corresponds perfectly with 23 mm, 25 mm and 28 mm tires. In addition, with the 2-Way Fit version, Campagnolo offers its tried-and-tested technology with full compatibility with clincher and tubeless tires. - Hub/Brake Compatibility: Center-Lock Disc - USB cup-and-cone bearing system - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Tire Type: Clincher, Tubeless Ready Clincher

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

The Drive Thru is a dummy hub or chain keeper that replaces your wheel while cleaning the chain. It is a fast and effective way to clean your chain between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. Installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great for packing the bike for transport. *This Drive Thru Value Meal includes three dummy axles with 1.0, 1.5 and 1.75 thread pitches and one pulley. - Value Meal includes 1.0, 1.5, and 1.75mm thread pitch dummy axles. - All Drive Thru dummy axles are 12mm in diameter. - Dummy axles are precision machined from 7075 aluminum and knurled for easy grip. - Pulleys are machined from durable Delrin. - Oil and solvent resistant O-rings - Lead-in threads designed for quick insertion into the frame - Simple, one-handed installation (no tools required)

- An ultra-wide, high performance alloy rim, weight optimized for Enduro, Trail and All Mountain use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 35mm and outer width of 39.5mm provides ultra-wide support for Plus-Size and high-volume tires - The corrugated rim center adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable

Replacement indicator chain for three speed Sturmey Archer hubs.

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 222g @ 32h/265mm - Box of 100 - Nipples sold separately